Our experts show you how to brighten up the outside of your home, from choosing the best outdoor lights to installing them.
You’ve gone to great heights to make your home and yard look fantastic. So why should all of your hard work vanish after the sun sets? Can you roll back the night and put it all on display with a flip of a switch and some carefully placed exterior house lights? Landscape lighting, when done correctly, brings out the finest in your home’s architectural elements while also calling attention to cherished plantings and trees.
What is the best method to light a landscape in Phoenix AZ?
Low-voltage landscape lighting is popular nowadays, and for a good reason. It’s safer to work with and less expensive to install than 120-volt systems. And, due to a step-down transformer, low-voltage lights may accomplish any effect, from romantic moonlight shining from a tree canopy to a soft glow that washes over a low garden wall. A pleasant lighting design is more than just finding the proper hardware; it’s also about artistry.
What Makes a Low-Voltage Outdoor Lighting System So Special?
Typically, landscape lighting is powered by a stepped-down power supply from your home.
- Transformer: Reduces household current from 120 volts to a safer 12 volts.
- Bulb: The brightness, color, and beam breadth of light, as well as the amount of electricity used, are all determined by the bulb.
- Fixture Housing: Helps shape light beam and protects bulb from the elements.
- Stake: Holds the fixture in position.
- Cables The lead wires of the fixture carry current to the lamp. Underlit trees and accent lights focused at the front create a welcoming post-sunset ambiance around this property.
How Much Support Landscape is Required?
Keep installations free of takes off and flotsam and jetsam to anticipate them from overheating. Supplant burned-out bulbs instantly so that others on the circuit aren’t subject to life-shortening voltage over-burdens.
How to Make a Lighting Plan for Your Outside Lights
Well, bullet, flood, and downlight for trees.
Ensure to bathe the trunk in light when shooting ground lights straight up into foliage. The uplit crown will resemble a UFO hovering in the sky if you don’t. Place two 20-watt downlights as high in a tree as feasible and point them so that their beams do not cross while illuminating vegetation from above.
Beds for Plants
Garden.
Fixtures should be no closer than 20 feet apart. “Rather than constant illumination, you want pools of light to guide your attention from one plant to the next.”
Fit bullet lights with 12-degree beam spread bulbs and point them at the corners of your home or architectural details; softer wash lights can fill in the gaps.
Garden Walls
Well, it’s either a bullet or a deluge.
Fixtures should be placed close to the foundation to bring the textures into sharp relief by the beams.
Focal Points
Flood, bullet, or wash.
Highlight an element that deserves attention—such as a fountain, a tree swing, or an arbor—by aiming two or more lights at it. The crossing beams reduce the harsh shadows that form when only one shines on an object.
